Showing posts with label What Not To Do Thursdays. Show all posts
Showing posts with label What Not To Do Thursdays. Show all posts

Thursday, October 22, 2015

What Not To Do When You Work on Cosplay #4


Hello Generation of Cosplayers! ^_^
DarthNancy here, bringing you more things not to do when you're working on your cosplay!

Today's topic is...what not to do when using a sewing machine or needle!

Don't be like Dee and try to run someone's hand under the needle!


For obvious reasons, you have to be super careful when you use a sewing machine, needles, and pins. I can't tell you have many times I have pricked myself with straight pins when trying to hem something, or how many times I have broken my skin with a sewing needle. The most serious thing you could do, though, is accidentally running your finger through the presser foot and stabbing yourself with the needle. I personally have not had this happened to me, it has happened to my mother. She somehow ran her finger through the foot and the needle came down on went into her nail. The worst part is that the needle broke and stayed in her nail so she had to pull it out. It was very gross and looked very painful! So make sure to pay attention when you are using the sewing machine!

Thursday, October 1, 2015

What Not To Do When You Work on Cosplay #3: Heat Gun

Hello Generation of Cosplayers! 

DarthNancy here ^_^ It's What-No-To-Do Thursday!  It's time to talk about the mistakes many of us make while we work on cosplay.

Today's topic will be... what not to do when using heat gun!


A heat gun is precisely what it sounds like: a gun that applies high heat. Heat guns are particularly popular in the cosplay world for working with thermoplastics like Worbla. Heat guns can be pretty dangerous, so it is important to handle them with care.

What can go wrong with a heat gun? Well, first of all you can burn yourself with the hot air and/or with the extremely hot steel end of the gun. I myself have burned myself by accidentally touching the tip of the heat gun...it was not fun T_T Don't burn yourself!

It is also extremely important that you work on cement or non-flammable surface. As you can see in the image about, I worked on my cosplay project over cement. If you use a heat gun on carpet or wood, you will burn it and run the risk of catching it on fire! You don't want to catch your house on fire for working on cosplay. Just don't do it, okay?

You don't want this to happen...


See you next time ^_^
Star Wars Font


Thursday, September 24, 2015

What Not To Do When You Work On Cosplay #2: Hot Glue Gun

Hello Generation of Cosplayers! 

DarthNancy here ^_^ It's What-No-To-Do Thursday!  It's time to talk about the mistakes many of us make while we work on cosplay.

Today's topic will be... what not to do when using a hot glue gun!



Thursday, September 17, 2015

What Not To Do When You Work On Cosplay #1: Expandable Foam

Hello Generation of Cosplayers! 
DarthNancy here ^_^

As you may have seen, Tuesdays are going to be Tip Tuesdays, days where we will offer general cosplay advice. Thursdays, however, will officially be What-No-To-Do Thursdays! This is going to be a segment where Discorda and I offer advice on what NOT to do. We have both learned a lot through trial and error, and we wish to share our bad experiences with you guys so you don't have to go through them! 

Today's topic will be... what not to do when using expandable foam!